It is a perfect sense of as many levels to have a car phone holder in your vehicle. Police forces are looking for anyone they can catch with their mobile phones while driving. Not only that, but it is so much safer that in the vehicle has a hands-free option.
If you do not believe us, here are some scary figures that you should bring to record and notice. The US Transportation Division created these figures in connection with NHTSA in 2019, based on accident numbers by 2018.
These numbers refer to deflections affected crashes. The definition of distracted driving is where individuals are attracting their attention from the ride; This can be a SMS or keeping a conversation on a mobile phone, food and drink, or anyone else to pay attention to this activity more attention to this activity.
SMS is by far the worst form of distraction. The NHTSA claims that the SMS or reading of a text that a driver is a driver's eyes for at least five seconds; When the vehicle moves at 55 km / h, the car has powered the length of a football field without the driver looked at the road once.
One of all four car accidents in the US is due to the SMS while driving, and almost 390,000 injuries occur from the same reason. If you write while driving, you have an accident six times more than if you are your vehicle when you're drunk.
With all the shocking statistics that use your phone with hands-free facilities, the meaningful option must be. I hope you agree with your mobile handsfree is the only way to go. But how do you select the best car phone mounting? There are hundreds to choose from. There we come in because we have put together the best car phone assembly; After all, car phone holders are not all in quality or price.
Best Car Phone Mount
MPOW CAR Phone Mount is an innovative solution to keep your hands-free phone. Use a 5.9-inch aluminum goose neck will allow the mount to be so close to your field of vision. You can place the phone holder in several positions on the board or windshield.
Due to the swan cheese, you can bend the car holder to give a clear and unobstructed view of your phone without compromising in-tabount screens or air projections.
The suction cup has a layer of sticky gel and actual act; Suction also uses a locking lever to maintain stability, ensuring that the phone holder remains in place. Even in the hardenier ground, you will find that the automobile assembly preserves its position without vibrations or jumping around the whole place.
If you decide to change the locations, the suction cup requires a quick rinse and a dried air to restore your stickiness. Automobile assembly works best if it is not fixed in an area that attracts direct sunlight.
You can adapt to any smartphone with screen sizes up to 6.5 inches, including the phone case. The MPOW FILK phone holder incorporates a 360 degree ball head that means that it can convert your phone into a landscape mode or portrait. This flexibility is a fantastic feature because many controllers prefer to use the map function on smartphones in horizontal mode. Or it may be a case of converting the phone until you find the best angle of vision.
Key Features
- 5.9-inch aluminum gooseneck.
- Strong vacuum suction cup.
- Can place phones into portrait or landscape mode.
- Holds smartphones with screen sizes up to 6.5 inches.
- 360-degree ball-head.
- Heat-resistant PC and ABS materials.
- The Cradle surface and grips are sponge-lined to prevent damage to phones.
Why We Like It:
The Mpow features a 5.9-inch flexible gooseneck feature that helps to maneuver the car phone mount into the best viewing angle possible.
The Aukey Telephone Car Owner is specifically for attachment to the air venting of your car, and it now has a much stronger, oversized clip that offers a stable support platform.
Choose the perfect viewing angle for yourself by turning the phone holder between the portrait, landscape view, or other thanks to the 360-degree rotating and swivel ball joint.
Air ventilation openings are not all the same shape and size so that the AUKE uses a 3-stage lock knob to determine the car phone holder in each vehicle with any air vent.
The larger than the average telephone cradle has an instant release button to access your phone in a hurry, when the need occurs. Aukey car phone assembly fits smartphones up to an Apple iPhone 11 Pro max.
Key Features
- 360-degree rotating and pivoting ball joint.
- Universal air vent phone mount.
- 3-level locking knob.
- Suitable for smartphones up to the Apple iPhone 11 Pro Max.
- Instant release button.
- It will not fit circular or odd-shaped vents.
Why We Like It:
The Aukey incorporates a 3-level locking knob that securely fastens a smartphone into the cradle.
Installation of the Electronics Electronics car is strictly suitable for fixture only air ventilation holes, but it is still very flexible and practical block.
It has wide compatibility for most smartphones from 1.9 inches to 3.7 inches wide. In the rear panel of the mountain is a quick release button that slid, open your hands to remove the phone from the fastener cradle. To place the phone to the cradle, simply press your arms on each side to firmly hold the phone on site. This allows you to mount one-handed operation.
Installation of the phone can easily rotate between landscape or portrait, with thick silicone gasket on air gripping. Ideal for horizontal or vertical ventilation holes.
Key Features
- Compatible with all smartphones up to 3.7 inches wide.
- Quick-release button.
- Simple operation.
- Silicone pads on the fastening clip.
- Fits all vertical and horizontal vents.
- Robust build.
Why We Like It:
The Beam Electronics car phone mount has a quick-release button on the reverse side of the cradle.
The FITFORT mobile phone Holder has a completely different assumption as the mount is active than ever more conventional.
Fitfort uses environmentally friendly, non-toxic, non-toxic silicone that starts upgrade 2018 to improve strength and viscosity.
This mobile phone holder fits flat on her dashboard; However, you can still keep the phone vertically or horizontally. The holder uses two hype holes that you can move to accommodate a vertical or horizontal location on the holder. This flexibility allows a wide range of mobile phones from four inches to seven inches.
As soon as you have used the phone between the rubber holders, the viewing angle does not hinder your view over the windshield and is at an angle that means that you do not have to lower your head to display the screen of the mobile phone.
Five sticky points hold the mount in position on your dashboard without leaving a mess when you decide to remove the holder. The rubber holders secure their cell even under hard terrain or braking conditions. To reuse the mountain, just rinse it under water.
Key Features
- Environmental friendly and non-toxic silicone.
- It lays flat on the vehicle dash.
- Five sticky points hold the mount in position.
- Two adjustable rubber holders for vertical or horizontal viewing.
- Will accommodate cell phone sizes from four to seven inches.
- Cell phones are held at a comfortable viewing angle.
Why We Like It:
The Fitfort incorporates a different design by laying flat to your dash and holding the phone in a vertical or horizontal secure position via two rubber holders.
The VICSEED CAR phone holder occupies an excellent position, hanging from the rear view mirror. This situation provides, your hyphen, air holes, and slots for the cup holders are cleaned from mess. Handy below the rear view mirror helps to save a clear view through the windshield.
There's so flexibility with this particular language. The distance from the mirror, the viewing angle and fully 360-degree rotation gives you a certain idea, as you can find the perfect height and angle of each driver.
Age is a reliable design of heat-resistant and high density materials. It includes a powerful tension in springs that hold it on four corners of your mirror. After you place the device in your mirror, the fast lock provides firmly in place. Each spring has a silicone substrate to increase the capture potential of clamps.
Holding your cell in position on the substrate of six large magnets N52 capable of keeping a combined weight to ten mobile phones. Your cell will not fall even under severe braking or driving over a rigid terrain. Magnets are so powerful, they will keep your cell in place, even if you leave a cell in a thick body.
Key Features
- Six large N52 magnets hold the cellphone in position.
- Heat-resistant and high-density materials.
- The holder adjusts to any angle and rotates 360 degrees.
- Powerful spring-tensioners.
- Quick-lock button.
- Non-slip silicone pads on the clamp arms.
- Suitable for large phones such as iPhone 12 Pro Max.
Why We Like It:
The Vicseed cell phone holder is perfect for drivers who prefer to have their cells off the dash and air vents and close to the rearview mirror.
The installation of the FONKEN car car is very versatile and can correspond to the comedians of the sun, the rear view mirrors and the edge of the fraud panel.
With these options options for suitable options, there are at least one who is suitable for each driver of the car.
After you have chosen the best place for yourself and your car, you can then configure your mobile phone to almost any angle of the review, and the 360 degree rotation and a slope of 180 degrees. Place the phone in a vertical or horizontal position and tilt the phone on what is best suited for safer driving.
Installation of the phone of the car is securely attached to the curved surface that you have chosen using your spring-loaded base and cannot be isolated by coarse terrain or sharp braking. Despite the fact that it is exclusively okay, he will not scratch or mark your car due to a non-slip silicone panel. The holder is reliable resistant to UV plastic stability.
Installation of the FONKEN CAR phone is adjusted to accommodate any smartphone from 4 to 6.8 inches. If you do not use the mount and temporarily want that it is bent, it is folded flat and can be stored either in the glove box or in the door pockets.
Key Features
- Will fit cell phones from 4 to 6.8 inches.
- Rotates through 360 degrees.
- Tilts up to 180 degrees.
- UV-reistant ABS material.
- Silicone pads to prevent scratching or marking the car.
- Fits onto dashboards, rearview mirrors, and sun visors.
Why We Like It:
The Fonken mount is highly versatile with different fitment options, sun visors, dash, and rearview mirrors.
WIXGEAR MAGNETIC PHONE MOUNT - Direct and high-quality air hole view.
The device will match any vertical or horizontal air hole. Purchase for a pack of two fasteners.
Construction is reliable with a rubber basis, and a powerful magnetic head that holds smartphones reliably. If you prefer a discrete mountain, not too bulky, this mountain will make a great choice.
The magnet is strong enough to hold the galaxy weight. Note 8. The phone holds its position as vertically or horizontally on the mountain. Magnet captures the phone as soon as you touch it to the mountain, but still cut off easily when you want a phone in your hand.
If you have any concerns, the magnet in the mountain playground will not be strong enough, there is a sticky metal plate that you can attach to the back of the phone.
Key Features
- Fits directly onto any vertical or horizontal air vent.
- Budget price for a pack of two mounts.
- Strong magnets.
- Sticky metal plate.
- Robust construction.
- Discreet.
Why We Like It:
The WixGear magnetic phone mount is a simple air vent mount that is affordable with two units in the pack.
Ainope is a vehicle phone holder that is also a piece of innovative look kit, but only compatible with horizontal air outlets.
The support has three competition points with shock-proof rubber linings that are blocked in place in the ventilation of the car. A hitch with many air ventilation supports is too loose or fall easily. Not using the Ainoope, do not stale in the vent when the roads put a little pothole.
With four automatic locking brackets (two at the bottom and two on the sides), keep your phone tightly on your grip, but it will not harm or scratch the phone due to internal silicone coatings on the clamps. Simply slide your phone into your place vertically (it does not admit horizontal), and you are ready to go. Side clamps are in a position that is clear from the side buttons on your phone.
Ainope allows universal compatibility for different phones, as long as the sizes are between 4 and 7 inches.
Ainoope will not block the flow of air through ventilation as much as typically occurs with other ventilation accessories.
Key Features
- Small and discreet vent positioning.
- Innovative styling.
- Auto-lock clamping arms, silicone lining for phone protection.
- Phone slides in and out of the holder.
- For vertical placement only.
- Universal phone compatibility.
- For phones between 4 and 7 inches.
Why We Like It:
The Ainope cell phone mount is exclusively for fixing to air vents but offers an innovative style.
Lisen's car phone montage uses a hook clip for incredibly stable fit on vehicle vents. There are three seizure points on ventilation that prevents any lateral movement or support on the vent, a problem with most other vent mounting car mounts.
By holding your phone firmly in position on the mounting buffer, six powerful magnets capable of maintaining the weight of four cell phones. You will discover that your phone will maintain its position on the cushion, even on the most reprehensible road. If you want to guarantee the phone, the phone will not fall, use the rectangular metal buffer on the back of your phone or case.
Lisen has universal compatibility with most mobile phone manufacturers and may contain phones from the size of an iPhone 12 Pro max.
The installation is simple; Place the appliance on the ventilation blade; You can adjust the length of the clip by turning the button to match the vent.
Key Features
- The Lisen is an air vent mount.
- Capable of holding the weight of four smartphones.
- Six powerful magnets.
- Three grasp points on the vent.
- Universal phone compatibility.
- Compatible with horizontal vents.
Why We Like It:
The Lisen uses a clip fastening that hooks over the air vent blade, ensuring a much tighter and secure fitting.
SyncWire magnetic media for phones will integrate at any flat surface of your car with a solid 3M 3M adhesive pad; Place the frame on plastic surfaces, not leather. Manufacturers offer a three-year warranty with the purchase. If you find that the holder does not hold your phone, you have missing accessories, tapes or can not settle in your car, you can claim a replacement.
The buffer has 4th generation neodymium magnets that easily support all cell phones, even with the housing always on the phone. There is universal compatibility with all telephones and you can use the mount safe for phones up to size and weight of the iPhone 12 Pro max.
The SyncWire mount has a solid aluminum alloy body and a flexible silicone buffer to protect your phone from all scratches.
The support also includes a solid metal ball joint that allows 360 degree rotation, whatever the one you prefer that your phone is possible.
Key Features
- Uses neodymium magnets.
- Universal phone compatibility.
- Magnets hold phones up to the size of the iPhone 12 Pro Max.
- 360-degree rotation.
- Strong adhesive fixes the mount to the plastic dash.
- Solid aluminum alloy body and silicone pad.
- 3-year warranty.
Why We Like It:
The Syncwire Phone mount has a solid aluminum alloy body that will last the test of time.
Comments
Write comments