Download Owner's Manual - RHD (UK, Australia)
Cold temperatures reduce drive cautiously even when the roads 4 the capacity of any battery, so it are clear. Otherwise, 2 tyres is recommended instead of and suspension and may not be the safety and handling of your snow chains. Scalding hot coolant lowing procedure: 2 the engine and allow sufficient and steam may blow out under 1.
When 1 both rams are raised and the stop mark” of the upper ram becomes visible, stop jacking 2 immediately. Once the wheel lug nuts have 5 been tightened, lower the vehicle fully to the ground and continue to tighten the lug nuts until they are 6 fully secured. Be sure to use extreme care in checking for thread style before installing 7 aftermarket lug nuts or wheels.
Turn the engine off and wait for a 1 while (at least 10 minutes) for the oil to return to the oil pan. Drained engine oil 5 should be disposed of properly, according to local environmental protection agency codes. When you are sure all the 8 pressure has been released, press down on the cap, using 9 a thick towel, and continue turning counterclockwise to remove it.