Download Owner's Manual - RHD (UK, Australia)
Otherwise, 2 tyres is recommended instead of and suspension and may not be the safety and handling of your snow chains. Scalding hot coolant lowing procedure: 2 the engine and allow sufficient and steam may blow out under 1. When 1 both rams are raised and the stop mark” of the upper ram becomes visible, stop jacking 2 immediately.
Once the wheel lug nuts have 5 been tightened, lower the vehicle fully to the ground and continue to tighten the lug nuts until they are 6 fully secured. Be sure to use extreme care in checking for thread style before installing 7 aftermarket lug nuts or wheels. Turn the engine off and wait for a while (at least 10 minutes) for the 2 oil to return to the oil pan.
Always protect 6 your skin by washing your hands thoroughly with soap and 7 warm water as soon as possible after handling used oil. When you are sure all the pressure has been released, press down on the cap, using 9 a thick towel, and continue turning counterclockwise to remove it. Turn the steering wheel to the 6 left and right with a little force and check the free play until you get a feel for resistance against the tyre 7 wheels movement.